Tech Support Guy System Info Utility version 1.0.0.9 Should I change to "AHCI" and move away from the "ATA" setting or not Mode 0-4: You can select a mode suitable mode that matches the timing your hard drive. From the File System menu, select a file system and enter a name for the reformatted disk in the Volume Label input box. ![]()
![]() #Phoenix awardbios cmos setup utility reformat hard drive windows#Connect the USB drive to your Windows XP computer, click Devices and select the USB drive you want to format. Be sure to make a copy of any data you might need later. WARNING Formatting erases all data on the drive. Also, drives that will be used for storage need to be formatted. #Phoenix awardbios cmos setup utility reformat hard drive how to#Auto: The BIOS automatically sets the system value depending on the timing of your hard disk drive. Guide - How to Format Hard Drive with HP Disk Storage Format Tool. If you have a drive that is formatted for a different type of computer or a drive that is not preformatted, you will need to format the drive before you can use it. I have not seen anyone saying that they have found they system showing "ATA" setting existing instead of "IDE". If 'Auto' (automatic) is selected, the BIOS will assess your drive and automatically specify the optimum PIO mode. If your drive supports this mode and this option is activated, the system will read the number of blocks per request from the configuration sector of the hard disk. I do not currently have a SSD internally but have used a SDD as an external storage device with a StarTech external HUB adaptor. This option is used to activate block mode for IDE hard disks. It does have a setting box for change to "AHCI" however. If the value of such item is «AHCI» then AHCi mode is already enabled. Find an item with the name «Storage options», «SATA Mode», «SATA Emulation» or anything similar. A menu appears listing the SATA options: IDE, RAID, and AHCI. In the IDE Configuration menu, select Configure SATA AS, then press Enter. Looking in BIOS under SATA settings it shows my system is set to "ATA". How to Enter BIOS or UEFI in a Computer or Laptop and Boot from a Flash Drive or a CD, DVD. In the BIOS Setup utility dialog, select Advanced-> IDE Configuration. I am running a Dell Inspiron 9010 Win10 with a 2TB internal SATA drive. If there is a device containing “AHCI” in its name as in our case, it means that AHCI mode is used in this computer.Open the section “IDE ATA/ATAPI controllers”.It is always best to use the hard drive manufacturers diagnostic software, if possible. It will pop up a window where listing the wiping methods. Right click the hard drive you want to wipe. You will get into the main interface of AOMEI Partition Assistant. Boot your computer with the bootable USB you created. Testing the hard drive is relatively easy if you have access to another computer to burn the bootable CD. After that preparation, you can start to wipe the hard drive. It can be checked in several ways: Method One When I press F2 itbrings me into the Phoenix -AwardBIOS CMOS Setup Utility. It is quite possible that AHCI mode is already enabled in your PC. How to Find out Which Mode the Computer’s Controller is Using? #Phoenix awardbios cmos setup utility reformat hard drive install#Remember that you can’t install an operating system on an SSD in IDE mode – it requires AHCI to be enabled. In this way, computer manufacturers are trying to avoid possible problems with compatibility of hardware and software.Īnother important difference between IDE and AHCI concerns working with SSDs. Power on and press Del as soon as you see the Phoenix AwardBIOS v6.00PG announcement. #Phoenix awardbios cmos setup utility reformat hard drive download#Download a diagnostic utility and burn it to a cd so you could use it to test your Hard drive upon boot i used Cute partition manager for the Quantum and later active SMART (trial version). Without kowing it, many users will feel no difference. buy a new hard drive (in my case its not that new cos i cant afford to buy one good quality), keep a spare or borrow from a friends hard drive 5. On the other hand, any SATA disk can work in IDE mode. That is, if you connect a disk with Windows XP to the system with AHCI-enabled controllers, you will run into a BSOD error (“the blue screen of death”). The matter is that operation of disk controllers in AHCI mode is supported in operating systems beginning with Windows Vista. Many people can ask quite a logical question: why have IDE mode for a SATA disk, if AHCI mode is natural for it enabling this SATA disk to completely realize its potential? Moreover, many motherboard manufacturers supply products with a default option to support PATA compatibility mode – IDE.
0 Comments
Leave a Reply. |
AuthorBill ArchivesCategories |